4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/-c12080.htm Wide range of 4x4 HDMI Matrix Switches available. Select from 3D Enabled, HDBaseT 4x4 HDMI Matrix Switches. Routes signals up to 330ft over CAT5e cables. 4x4 HDMI Matrix Switchers Copyright 2017 KVMSwitchTech Wednesday, March 29, 2017 22:58 GMT 4x4 HDMI Matrix Switch HDR4x4S The HDR4X4S, 4x4 hdmi router enables users to switch HDMI Video and digital audio from any four HDMI sources to four HD displays. This 4 input 4 output HDMI Matrix switcher is a combination of HDMI Switch and HDMI Splitter. Any input can be displayed on any of the Outputs or the same input can be displayed on all the outputs. This HDMI Video Matrix Switch is used for Digital Signage, commercial, and home theaters applications. Recently Added: 4x4 HDMI Matrix 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-hdr4x4s-p46946.htm 4x4 HDMI Matrix Switch HDR4x4S http://www.kvmswitchtech.com/ImagesCache/4x4-hdmi-matrix-switch-hdr4x4s-i33343.jpg http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-hdr4x4s-p46946.htm SmartAVI new HDR4X4S 999 Video Matrix Switches > 4x4 HDMI Matrix Switchers 9 lb 31 October 2014 22:58 CST 4x4 HDMI Matrix Switch with 3D full EDID Managment Learning RS232 and Infra Red Remote 1U Rackmount The AB-5645LCM is our next-generation 4X4 HDMI Matrix Switcher, designed for multiple sources and displays. There are four HDMI connections for inputs and four HDMI connections for outputs located on the back panel. This HDMI Matrix has EDID management and EDID memory, including a new feature called and ldquo;Fast Speed Start and reg; and rdquo; which permits switching between HDMI sources in as little as 2 seconds. The AB-5645LCM supports bandwidth of 6.75Gbps and data rates up to 2.5 Gbps, enabling 1080p HDMI formats and UXGA DVI resolutions. Building upon our successful 5642 series, the AB-5645LCM and rsquo;s front panel includes an LCD display with two data display lines. Functional manual control is achieved through push buttons located on the front panel. External functional control is achieved through a RS232 Connection or through the IR Remote Control. The RS232 connection allows functions to be controlled by systems like Control 4 (drivers included) or any computerized software/hardware control system. When using the AB-5645LCM, one-to-many or many-to-one connections can be established. You can easily connect any input device to any output device. You can also establish a single input device to many Output devices, eliminating the need to constantly re-route Video input and output cables. You can use KVMEP-132 Serial RS232 to ethernet TCP/IP converter to access the Video Matrix Switch remotely. Recently Added: 4x4 HDMI Matrix Switcher 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-with-3d-full-edid-managment-learning-rs232-and-infra-red-remote-1u-rackmount-p49974.htm 4x4 HDMI Matrix Switch with 3D full EDID Managment Learning RS232 and Infra Red Remote 1U Rackmount http://www.kvmswitchtech.com/ImagesCache/4x4-hdmi-matrix-switch-with-3d-full-edid-managment-learning-rs232-and-infra-red-remote-1u-rackmount-i37943.jpg http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-with-3d-full-edid-managment-learning-rs232-and-infra-red-remote-1u-rackmount-p49974.htm KVMSwitchTech new AB-5645LCM 600 Video Matrix Switches > 4x4 HDMI Matrix Switchers 12 lb 31 October 2014 22:58 CST 4x4 HDMI Matrix Switch with 3D Support and RS232 Control 1U Rackmount KVMSwitchTech's 4x4 HDMI Matrix Switch, MTX-44-3D supports 3D and comes with 4 HDMI inputs and 4 HDMI outputs. It is a true matrix and can distribute any one of 4 sources to either of 4 displays. This HDMI Router works as a splitter as well to show the same source on all 4 displays simultaneously. Our 4x4 HDMI Matrix Switcher, MTX-44-3D supports full HD 1080p and is an ideal product for Digital signage, super markets, shopping malls, data control centers, information distribution, conference room presentations, education and training, corporation show rooms, and luxurious houses. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-with-3d-support-and-rs232-control-1u-rackmount-p50032.htm 4x4 HDMI Matrix Switch with 3D Support and RS232 Control 1U Rackmount http://www.kvmswitchtech.com/ImagesCache/4x4-hdmi-matrix-switch-with-3d-support-and-rs232-control-1u-rackmount-i39109.jpg http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-with-3d-support-and-rs232-control-1u-rackmount-p50032.htm KVMSwitchTech new MTX-44-3D 399 Video Matrix Switches > 4x4 HDMI Matrix Switchers 9 lb 30 March 2016 22:58 CST 4x4 Cat5e/6/7 HDMI Matrix Switch with HDBaseT over Single Cat5e/6/7 cable includes 4 HDBaseT Receivers KVMSwitchTech and rsquo;s AB-5645LCM-CT is High-performance 4x4 Cat5 HDMI Matrix HDBaseT Switcher with Four (4) HDMI inputs and supports simultaneously four (4) HDMI and four (4) CAT5e/6/7 outputs. The AB-5645LCM-CT, 4x4 Cat5 hdmi matrix switcher is based on HDBaseT technology and that supports HDMI Video with embedded audio, RS-232, IR bi-directional, and Ethernet all over a single Cat5e/6/7 cable. With a Signal bandwidth of 340Mhz, there is no signal degradation. High Definition digital signals can be selected and distributed to any 8 Outputs simultaneously. The HDMI Matrix Switcher is certified as being fully CEC and HDCP 2.0 compliant, HDMI V1.4a 3D formats, data rates up to 6.75 Gbps. It Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD displays. The AB-5645LCM-CT has one CAT5e/CAT6 and HDMI connector for each output, effectively making this an 4x8 Video Matrix Switch (same signal on both outputs). One cat RJ45 connection for each output extends the HDMI signal to remote location via HDBaseT Cat5e/6/7 HDMI Receivers (Cat6/7 Cable 330 Feet (100M), Cat5e 200 Feet (75M), Cat5 100 Feet (35M). The EDID can be selected between seven (7) different modes. This Cat5 4X4 HDMI Matrix HDBase-T Router can be controlled with front panel push buttons, IR remote or via RS232. An RS232 Windows GUI interface is provided for Matrix routing. Zone control with 4 independent remote controls provide easy channel selection based on independent remotes. For example: Remote #2 controls only video on Output number 2. It also includes one master remote that operates all sources and destination devices. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-includes-4-hdbaset-receivers-p50039.htm 4x4 Cat5e/6/7 HDMI Matrix Switch with HDBaseT over Single Cat5e/6/7 cable includes 4 HDBaseT Receivers http://www.kvmswitchtech.com/ImagesCache/4x4-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-includes-4-hdbaset-receivers-i38083.jpg http://www.kvmswitchtech.com/4x4-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-includes-4-hdbaset-receivers-p50039.htm KVMSwitchTech new AB-5645LCM-CT 3000 Video Matrix Switches > 4x4 HDMI Matrix Switchers 24 lb 26 May 2015 22:58 CST 4x4 Cat5e/6/7 HDMI Matrix Switch with HDBaseT over Single Cat5e/6/7 Cable KVMSwitchTech and rsquo;s HDMI-44-HDB is High-performance 4x4 Cat5 HDMI Matrix HDBaseT Switcher with four (4) HDMI inputs and supports simultaneously four (4) HDMI and four (4) CAT5e/6/7 outputs. The HDMI-44-HDB, 4x4 cat5 hdmi matrix Switcher is based on HDBaseT technology and that supports HDMI Video with embedded Audio, RS-232, IR bi-directional, and Ethernet all over a single Cat5e/6/7 cable. With a Signal bandwidth of 340Mhz, there is no signal degradation. High definition digital Signals can be selected and distributed to any 8 outputs simultaneously. The HDMI Matrix Switcher is certified as being fully CEC and HDCP 2.0 compliant, HDMI V1.4a 3D formats, data rates up to 6.75 Gbps. It supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD displays. The HDMI-44-HDB has one CAT5e/CAT6 and HDMI connector for each output, effectively making this an 4x8 Video Matrix Switch (same signal on both outputs). One cat RJ45 Connection for each output extends the HDMI signal to remote location via HDBaseT Cat5e/6/7 HDMI Receivers (Cat6/7 Cable 330 Feet (100M), Cat5e 200 Feet (75M), Cat5 100 Feet (35M). The EDID can be selected between seven (7) different modes. This Cat5 4X4 HDMI Matrix HDBase-T Router can be controlled with front panel push buttons, IR remote or via RS232. An RS232 Windows GUI interface is provided for matrix routing. Zone control with 4 independent remote controls provide easy channel selection based on independent remotes. For example: Remote #2 controls only Video on Output number 2. It also includes one master remote that operates all sources and destination devices. HDBaseT HDMI receivers sold separate (Please see below). 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-p50224.htm 4x4 Cat5e/6/7 HDMI Matrix Switch with HDBaseT over Single Cat5e/6/7 Cable http://www.kvmswitchtech.com/ImagesCache/4x4-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable--i38451.jpg http://www.kvmswitchtech.com/4x4-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-p50224.htm KVMSwitchTech new HDMI-44-HDB 2100 Video Matrix Switches > 4x4 HDMI Matrix Switchers 18 lb 26 May 2015 22:58 CST 4X4 HDMI Matrix Switch 3D over Single Cat5e/Cat6 Cable with RS232 and IR, 4 Receivers included .desc{ FONT-SIZE: 10pt; COLOR: black; font-family: Verdana;} The SW-HDM3D-C6-4X4E, HDMI 3D Matrix Switch over Single CAT5e/6 with IR Pass-Through provides the most flexible and cost effective solution in the market to route high definition Video sources plus multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at the same time. Through low cost Cat5e/6 UTP cables, not only High quality Video and audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the Front Panel buttons, RS232, IR remote and now Ethernet via CPU or Laptop remotely over the network. With single power design at the source site, each remote module is easily installed with bi-direction IR control. This function makes it easy for users at the display gain access and control to the DVD player, cable Box or any HDMI/IR supported devices directly. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-3d-over-single-cat5ecat6-cable-with-rs232-and-ir-4-receivers-included-p50494.htm 4X4 HDMI Matrix Switch 3D over Single Cat5e/Cat6 Cable with RS232 and IR, 4 Receivers included http://www.kvmswitchtech.com/ImagesCache/4x4-hdmi-matrix-switch-3d-over-single-cat5ecat6-cable-with-rs232-and-ir-4-receivers-included-i38786.jpg http://www.kvmswitchtech.com/4x4-hdmi-matrix-switch-3d-over-single-cat5ecat6-cable-with-rs232-and-ir-4-receivers-included-p50494.htm KVMSwitchTech new SW-HDM3D-C6-4X4E 2199 Video Matrix Switches > 4x4 HDMI Matrix Switchers 18 lb 31 October 2014 22:58 CST 4x4 HDMI Matrix with instaport feature and 2x2 HDMI Video Wall Processor KVMSwitchTech's VW-HDMI-4P, 4x4 HDMI Matrix with instaport feature and 2x2 HDMI Video Wall Processor is a high performance, high speed HDMI Video processing system that can be easily confi gured and controlled for Three different Output modes (Matrix, Dual and Video Wall) for various applications. Matrix mode routes the source signals to output displays as a regular matrix does, Dual mode allows 2 sets of 2 selected sources to be shown on designate output displays (2 displays as a set) and Video Wall mode extends a selected source to all 4 output displays as one time. Supports full range of video resolutions up to WUXGA@60 (RB) or 1080p and different audio formats up to 7.1CH LPCM at 192 kHz sampling rate based on input source capability. The VW-HDMI-4P control can be done through IR using the included remote control, Telnet (Ethernet), RS232 or from the front panel buttons, the included GUI software or built-in browser. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdmi-matrix-with-instaport-feature-and-2x2-hdmi-video-wall-processor-p50631.htm 4x4 HDMI Matrix with instaport feature and 2x2 HDMI Video Wall Processor http://www.kvmswitchtech.com/ImagesCache/4x4-hdmi-matrix-with-instaport-feature-and-2x2-hdmi-video-wall-processor-i39032.jpg http://www.kvmswitchtech.com/4x4-hdmi-matrix-with-instaport-feature-and-2x2-hdmi-video-wall-processor-p50631.htm KVMSwitchTech new VW-HDMI-4P 1924 Video Matrix Switches > 4x4 HDMI Matrix Switchers 21 lb 14 March 2017 22:58 CST 4x4 HDBaseT HDMI Matrix Switch with four Power over Ethernet POE receivers .desc{ FONT-SIZE: 10pt; COLOR: black; font-family: Verdana;} KVMSwitchTech's HDBaseT 4x4 HDMI Matrix is uniquely designed with Audio de-embedder in mind. It and rsquo;s a high-performance Matrix devised for rapidly routing HD Video, audio and control signals from four sources to four independent displays over cat5e/6 Cables at distances up to 200 feet (60 meters). The HDMICAT-44-HDB-POE unit consists of two local HDMI outputs and 4 x RJ-45 outputs paired with 4 receivers. The four receivers are powered over Ethernet (PoE) from the HDMI Matrix and are controllable via bi-directional IR and amp; RS232. This HDMI Matrix supports computer video resolution up to 1920x1200, including 3D, HDTV 1080p/60 and allows cross-point switching rapidly. The matrix provisions with full HDCP management for continuous encryption and authentication to maintain quick and reliable switching. It also incorporates EDID communication for each input/output ensuring proper source power up and maintaining a steady video signal on the display side. Fully controllable through RS232 and optional TCP/IP when used with third-party control systems. It is ideal for various residential and commercial applications such as digital signage , military, homes and theater, churches and lecture halls, where signal management and distribution of HD Video signals are is critical. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdbaset-hdmi-matrix-switch-with-four-power-over-ethernet-poe-receivers-p50768.htm 4x4 HDBaseT HDMI Matrix Switch with four Power over Ethernet POE receivers http://www.kvmswitchtech.com/ImagesCache/4x4-hdbaset-hdmi-matrix-switch-with-four-power-over-ethernet-poe-receivers--i39098.jpg http://www.kvmswitchtech.com/4x4-hdbaset-hdmi-matrix-switch-with-four-power-over-ethernet-poe-receivers-p50768.htm KVMSwitchTech new HDMICAT-44-HDB-POE 2499 Video Matrix Switches > 4x4 HDMI Matrix Switchers 24 lb 26 May 2015 22:58 CST 4x4 HDBaseT HDMI Matrix Switch with four Power over Ethernet POE receivers and TCP/IP Control .desc{ FONT-SIZE: 10pt; COLOR: black; font-family: Verdana;} KVMSwitchTech's HDBaseT 4x4 HDMI Matrix is uniquely designed with audio de-embedder in mind. It and rsquo;s a high-performance matrix devised for rapidly routing HD Video, audio and control signals from four sources to four independent displays over cat5e/6 cables at distances up to 200 feet (60 meters). The HDMICAT-44-HDB-POE unit consists of two local HDMI outputs and 4 x RJ-45 outputs paired with 4 receivers. The four receivers are powered over Ethernet (PoE) from the HDMI Matrix and are controllable via bi-directional IR and amp; RS232. This HDMI Matrix supports computer video resolution up to 1920x1200, including 3D, HDTV 1080p/60 and allows Cross-point switching rapidly. The matrix provisions with full HDCP management for continuous encryption and authentication to maintain quick and reliable switching. It also incorporates EDID communication for each input/output ensuring proper source power up and maintaining a steady video signal on the display side. Fully controllable through RS232 and integrated TCP/IP when used with third-party control systems. It is ideal for various residential and commercial applications such as digital signage , military, homes and theater, churches and lecture halls, where signal management and distribution of HD Video signals are is critical. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdbaset-hdmi-matrix-switch-with-four-power-over-ethernet-poe-receivers-and-tcpip-control-p50769.htm 4x4 HDBaseT HDMI Matrix Switch with four Power over Ethernet POE receivers and TCP/IP Control http://www.kvmswitchtech.com/ImagesCache/4x4-hdbaset-hdmi-matrix-switch-with-four-power-over-ethernet-poe-receivers-and-tcpip-control-i39099.jpg http://www.kvmswitchtech.com/4x4-hdbaset-hdmi-matrix-switch-with-four-power-over-ethernet-poe-receivers-and-tcpip-control-p50769.htm KVMSwitchTech new HDMICAT-44-HDB-POE-IP 0 Video Matrix Switches > 4x4 HDMI Matrix Switchers 18 lb 19 July 2016 22:58 CST 4x4 HDMI Matrix with 3D and RS232 Control 1U Rackmount KVMSwitchTech's MTX-44-3DG, 4x4 HDMI Matrix Switcher with 3D support comes with 4 HDMI inputs and 4 HDMI outputs. It is a true HD Matrix Switcher and can distribute any one of 4 sources to either of 4 displays. This HDMI Router works as a Splitter as well to show the same source on all 4 displays simultaneously. This MTX-44-3DG, 4x4 HDMI Video Matrix supports full HD 1080p. It is an ideal product for Digital signage, super markets, shopping malls, data control centers, information distribution, conference room presentations, education and training, corporation show rooms, and luxurious houses. 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/4x4-hdmi-matrix-with-3d-and-rs232-control-1u-rackmount-p50801.htm 4x4 HDMI Matrix with 3D and RS232 Control 1U Rackmount http://www.kvmswitchtech.com/ImagesCache/4x4-hdmi-matrix-with-3d-and-rs232-control-1u-rackmount-i39144.jpg http://www.kvmswitchtech.com/4x4-hdmi-matrix-with-3d-and-rs232-control-1u-rackmount-p50801.htm KVMSwitchTech new MTX-44-3DG 399 Video Matrix Switches > 4x4 HDMI Matrix Switchers 12 lb 30 March 2016 22:58 CST Shinybow SB-5645CAK 4x4 HDMI HDBaseT Matrix Switch with Auxiliary Audio I/O The Shinybow SB-5645CAK is a professional 4x4 matrix routing switch. Supporting (4) HDMI Inputs and (4) Auxiliary Audio Inputs and (4) HDMI, (4) SPDIF and (4) HDBaseT and trade; Outputs. The SB-5645CAK is based on the HDBaseT and trade; standard and supports full resolution HDMI video with embedded EDID and PoE function (optional), Audio, RS-232, Ethernet and bi-directional IR, all over a single CATx cable. With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed to any (4) Inputs to (8) outputs simultaneously (channel outputs mirrored). The switcher is certified as being fully CEC, ARC and HDCP 1.3 compliant with HDMI 1.4a, 4K2K@30Hz, DVI 1.0, 3D formats and a wide frequency range of 25MHz ~ 340MHz.Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD display. The SB-5645CAK has 1x HDMI and Auxiliary Audio (analog stereo audio) connector for Input, effectively making this an (4) in x (8) out switcher (same signal on both outputs). Using the IR remote the switchers HDBaseT and trade; extender Transmitter (Tx) allows you to connect a source in a remote location. Likewise, the HDBaseT and trade; Output and our HDBaseT and trade; Receiver allows you to connect a display in a remote location. The EDID management can be selected between (7) different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). A RS-232 Windows GUI interface is provided for matrix routing control (Windows only). 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/shinybow-sb-5645cak-4x4-hdmi-hdbaset-matrix-switch-with-auxiliary-audio-io-p50974.htm Shinybow SB-5645CAK 4x4 HDMI HDBaseT Matrix Switch with Auxiliary Audio I/O http://www.kvmswitchtech.com/ImagesCache/shinybow-sb-5645cak-4x4-hdmi-hdbaset-matrix-switch-with-auxiliary-audio-io-i39374.jpg http://www.kvmswitchtech.com/shinybow-sb-5645cak-4x4-hdmi-hdbaset-matrix-switch-with-auxiliary-audio-io-p50974.htm Shinybow new SB-5645CAK 1917.44 Video Matrix Switches > 4x4 HDMI Matrix Switchers 14 lb 16 February 2017 22:58 CST Shinybow SB-5645CAP 4x4 HDMI HDBaseT Matrix Switch with Auxiliary Audio I/O with PoH (Power Over HDBaseT ) The SB-5645CAP is a professional 4x4 matrix routing switch. Supporting (4) HDMI Inputs and (4) Auxiliary Audio Inputs and (4) HDMI, (4) SPDIF and (4) HDBaseT and trade; Outputs. The SB-5645CAP is based on the HDBaseT and trade; standard and supports full resolution HDMI video with embedded EDID and PoE function (optional), Audio, RS-232, Ethernet and bi-directional IR, all over a single CATx cable. With a signal bandwidth of 340Mhz, there is no signal degradation. High Definition Digital signals can be selected and distributed to any (4) Inputs to (8) outputs simultaneously (channel outputs mirrored). The switcher is certified as being fully CEC, ARC and HDCP 1.3 compliant with HDMI 1.4a, 4K2K@30Hz, DVI 1.0, 3D formats and a wide frequency range of 25MHz ~ 340MHz.Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD display. The Shinybow SB-5645CAK has 1x HDMI and Auxiliary Audio (analog stereo audio) connector for Input, effectively making this an (4) in x (8) out switcher (same signal on both outputs). Using the IR remote the switchers HDBaseT and trade; extender Transmitter (Tx) allows you to connect a source in a remote location. Likewise, the HDBaseT and trade; Output and our HDBaseT and trade; Receiver allows you to connect a display in a remote location. The EDID management can be selected between (7) different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). A RS-232 Windows GUI interface is provided for matrix routing control (Windows only). 4x4 HDMI Matrix Switchers http://www.kvmswitchtech.com/shinybow-sb-5645cap-4x4-hdmi-hdbaset-matrix-switch-with-auxiliary-audio-io-with-poh-power-over-hdbaset-p50975.htm Shinybow SB-5645CAP 4x4 HDMI HDBaseT Matrix Switch with Auxiliary Audio I/O with PoH (Power Over HDBaseT ) http://www.kvmswitchtech.com/ImagesCache/shinybow-sb-5645cap-4x4-hdmi-hdbaset-matrix-switch-with-auxiliary-audio-io-with-poh-power-over-hdbaset-i39373.jpg http://www.kvmswitchtech.com/shinybow-sb-5645cap-4x4-hdmi-hdbaset-matrix-switch-with-auxiliary-audio-io-with-poh-power-over-hdbaset-p50975.htm Shinybow new SB-5645CAP 2174.72 Video Matrix Switches > 4x4 HDMI Matrix Switchers 18 lb 16 February 2017 22:58 CST