has been added to your cart.

Shinybow SB-5669CKP 16x16 4K2K / PoE / HDMI & HDBaseT™ - UHD 4K2K Matrix Routing Switch w/ Full EDID Management/Learning


$14999.00 $9999.00


Description :

The Shinybow SB-5669CKP is a professional 16x16 matrix routing switch. Supporting (16) HDMI Inputs and (16) HDMI Outputs & (16) HDBaseT™ Outputs with PoH. The SB-5669CKP is based on the HDBaseT™ standards and supports full resolution HDMI video with embedded HDCP, RS-232 and Bi-directional IR all over a single CAT6/6a/7 category cable. With a signal bandwidth of 340Mhz, there is no signal degradation. High definition digital signals can be selected and distributed to any of the (16) Inputs to any of the (32) Outputs simultaneously (channel outputs mirrored). The switcher is fully CEC, HDCP 1.3, HDMI1.4a certified with HDMI 4K2K@30Hz, DVI 1.0, 3D formats and a wide frequency range of 25MHz~340MHz. Supports UXGA/WUXGA/DVI 1920x1200 resolutions to any HD display. The SB-5669CKP has 16x HDMI connector Inputs and 16x HDBaseT™ (PoH) & 16x HDMI Outputs, effectively making this a (16) In x (32) Out switcher (same signal on both outputs). Using the HDBaseT™ output remote transmitter, it will allow you to connect a source in a remote location. Likewise, the HDBaseT™ Output and our HDBaseT™ receiver, allows you to connect a display in a remote location. EDID management can be selected between (7) different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). A RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

 


Product Features

 

  • Enables switching of (16) HDMI digital source devices to (16) HDMI devices and (16) HDBaseT™ Transmitter Outputs (PoH) to (32) total destinations
  • New IR Matrix Source Routing Control
  • HDBaseT™ specifications with Bi-Directional IR, RS-232, Multi audio format and HD video signals over single CATx (6/6a/7) category cable
  • HDMI digital video w/ embedded HDCP, DVI format and CEC/HDCP 2.0 compliant
  • Worldwide EDID control modes for HDMI full 4K2K HD Video resolutions
  • Wide frequency range of 25MHz ~ 340MHz. Supports HDMI 4K2K@30Hz, HDMI 1.4a
  • Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV HDMI resolutions 480i/480p, 576i/576p, 720p, 1080i/p & 4K2K(24/30Hz)
  • Compatible with all HDMI source devices, PC monitors, Plasma HD displays, HDTVs and audio receivers or audio amplifiers
  • Digital video TMDS formats resolutions up to 4K2K with Deep color 36-bit
  • Digital audio support digital multi-channel audio: Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2
  • HDBaseT™ supports IR remotes and RS-232 signals over a single CATx (6/6a/7) category cable
  • Various User Interface Controls:
    • Windows based GUI control via RS-232 port interface WIN2000/XP/WIN7-32/WIN7-64
    • Front panel push buttons
    • IR wireless remote controllers
    • Ethernet switch control (via pc protocol commands)
    • Third party RS-232 controller (via simple ASCII)
  • Supports (7) world wide control function keys: Full function front panel controls: ALL / OFF / EDID / LOCK / RECALL / MEMORY / ENTER
  • Supports EDID modes :
    • a. Embedded EDID modes: FSS (Fast Speed Start) / H24-3D/ H24-3D-M/ H36-3D/ H36-3D-M/ 4K2K-3D / DVI-D 1920x1200-60Hz
    • b. External modes : Learning mode (learning destination EDID link to source device)
  • Automatic scanning input & output status via LCM showout on front panel
  • Using the build-in booster, each HDMI Output port is capable of driving cable lengths of 1080p up to 98 ft (30M) & 4K2K up to 66 ft (20M)
  • Supports IR remotes and IR extenders for a distance of up to ~ 984 ft (300M) Maximum
  • Supports universal power adaptor AC100V~AC240V, 50/60Hz


Specifications

Type of HDMI Switcher
(16) HDMI Inputs to (16) HDMI & (16) HDBaseT™ Outputs Matrix Switcher
HDMI Supports
HDMI 4K2K@30Hz, 1080p@60Hz, H36-bit Deep color, 3D, HDMI V1.4 formats
HDBaseT™ Support
HDMI digital signals, bi-directional IR, RS-232 and PoH over single CATx (6/6a/7) cable
HDCP/CEC Support
HDCP 1.3 Compliant, CEC Compliant
Video Bandwidth
Double Data Rates: 340Mhz
Digital Video Support
HD: 480i/ 480p/ 720p/ 1080i/p and 4K2K up to 36bit deep color
Inputs (HDMI)
(16) HDMI (HDMI or DVI digital source)
Outputs (HDMI)
(16) HDMI (to destination)
Booster (Each HDMI Output)
1080p up to ~98 feet (30M) & 4K2K up to ~66 feet (20M)
HDBaseT™ Output (PoE)
(16) HDBaseT™ Transmitter (PoE) via a single category cable using RJ-45 connectors
HDMI Digital Multi-Channel Audio Support
Multi Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6CH, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
HDBaseT™ Control
  • 1. IR Control:
    • (16) IR In (Sends IR signals to 16x rooms via a HDBaseT™ Transmitter)
    • (16) IR Out (Links to receive IR signals from 16x rooms via a HDBaseT™ Extender)
  • 2. RS-232 I/O Control: (16) RS-232 I/O (Controls 16x rooms with RS-232 via the switchers HDBaseT™ Extender Tx)
Switch Controls
  • 1x Select & Function buttons on front panel (Data status via LCM panel show out)
  • 1x IR Remote Controller (switch control), p/n: SW-HD69CK
  • 16x IR Room Remote Controller (switch control), p/n: SW-HD69CK01~16
  • 1x IR External port (switch control via 3.5mm OD Jack)
  • 1x RS-232 series interface (switch control)
  • 1x Ethernet series interface (switch control)
Source Status
Input status LEDs indicates presence of a live signal
(39) Function Control Keys
1. ALL, 2. OFF, 3. RECALL, 4. ENTER, 5. MEMORY, 6. LOCK, 7. EDID, 8. Destination 1 thru 16, 9. Source 1 thru 16
(7) EDID Management
Select Embedded EDID Modes: Mode1: Fast Speed Start®, Mode2: H24-3D, Mode3: H24-3D-M, Mode4: H36-3D, Mode5: H36-3D-M, Mode6: 4K2K-3D, PCM-2CH, Mode7: DVI-D 1920x1200
Learning Mode
  • 1. Select LEARNING mode-1 : Learning single Destination EDID to Link Source
  • 2. Select LEARNING mode-2 : Learning multiple Destination EDID to Link Source
Infrared Frequency
38Khz
IR External Distance
SB-100 (~984 feet / 300M maximum), SB-100C (~6.5 feet/2M)
HDBaseT™ Extender Distance
~328 feet / 100M maximum
HDMI I/O Connector
HDMI Type A - SMD 19pin female type
Temperature
Operating Temperature 32°F - 100°F (0°C - 32°C)
Dimensions (LxWxH)
17.32 x 11.81 x 6.93 in(442x300x176mm)
Rack Mount
4RU High 19 in Rack Mount #4U-440L (with rack mount ears)
Power Supply
AC 100~240 VAC 50/60Hz (120V/3A/360W; 220V/1.63A/360W)
Safety Approvals
CE, FCC, REACH
Product Weight
4.575 Kgs / 10.45 lb
author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

author
James Johnson- Lockheed Martin

Knowledgeable, experienced and courteous staff. We needed Fiber Optic Extenders with EMI shielding to avoid interference in signal transfers. KVMSwitchTech worked with us to design a DVI Fiber Optic Extender customized for our application. Thanks for all your help.

author
Angela Russo - Panasonic

Rack LCDs for one of our newer locations were required for data monitoring. The light weight and short depth design of the Rackmount LCD Console was exactly what we were looking for. In addition, the product's streamlined and durable construction ensures its longevity and reliability in our environment. These guys are pros and know what they are doing.

Add a review

1 2 3 4 5

Call to get best offer