has been added to your cart.

Shinybow SB-6333x3KIT 3-Play HDBaseT™ Tx & RX KIT up to 330 Feet (100M) (2-way IR, RS-232, HDMI) (one retail box)


$398.00 $300.00


Description :

The Shinybow SB-6333x3 HDBaseT™ receiver and transmitter can receive and transmit HDMI signals, Bi-Directional IR Remote input or output signals and RS-232 I/O interface signals via a single category cable for long distances up to 328 feet (100M) maximum. SB-6333x3 kit use a CAT6, CAT6a or CAT7 (UTP/FTP) category cable via RJ-45 8P8C socket. This product provides higher full HD HDMI 1.4a, resolution support of 480i/p, 720p,1080i/p or high HD 4K2K quality that is identical to the high quality full HDMI 1.4 source signals. This HDBaseT™ Receiver and Transmitter are useful for sending HDMI digital video/multi-channel audio format, IR remote input/output and RS-232 command control signals via a category LAN cable from the HDBaseT™ Transmitter or Receiver.

  • SB-6333T3 Transmitter
    • Inputs:
      • 1x RS-232
      • 1x HDMI
      • 1x IR IN jack
      • 1x IR OUT jack
    • Outputs:
      • 1x CAT5/6 UTP
  • SB-6333T3 Receiver
    • Inputs:
      • 1x CAT5/6 UTP
    • Outputs:
      • 1x RS-232
      • 1x HDMI
      • 1x IR IN jack
      • 1x IR OUT jack

 

   


Product Features

 

  • HDBaseT™ HDMI over single CAT6/6A/7 category LAN cable Receiver and Transmitter
  • HDBaseT™ receives/transmits HDMI, IR I/O and RS-232 I/O signals
  • Uses a single CAT6, CAT6A and CAT7 (UTP/FTP) category cable
  • Supports link speeds of up to 3.4 Gbps, HDMI 1.4, full HD 4K2K signal, HDCP compliant
  • Supports Digital RGB 36bits, HDMI digital video TMDS, digital multi-channel audio formats
  • Extends higher quality full HD DVI video WUXGA 1920x1200 resolution
  • Supports HD High Definition full range resolutions of 480p, 720p 1080i/1080p and 4K2K
  • Supports long distances of up to 328 feet (100M) between the HDBaseT™ Transmitter and Receiver
  • Supports wall mount installation 13 pcs. into 19 inch 2U rack mount
  • Power supports DC input with low power consumption (Full load 650mA)
  • Power supply using universal power switch 50/60Hz, 100~240VAC


Specifications

Type of Extender
HDBaseT™ Transmitter and Receiver for HDMI over single category LAN Cable
Input Signals
HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vpp, DDC 5Vpp
HDBaseT™ Signal Supports
HDMI 1.4 Standard, DVI and HDCP Compliant
Video Support
HDMI and DVI TMDS format for 1920x1200 resolutions up to 3.4Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format
HDMI Audio I/O Supports
Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
Category Cable Support
CAT5e, CAT6, CAT6a UTP or FTP cable
Supports HDMI Resolutions
480p, 720p, 1080i/1080p or 4K2K (24Hz)
Scan Rate Accepted
Supports HDMI full HD Resolution; Frequency 24Hz to 60Hz
Controls
  • 1x IR in
  • 1x IR out
  • 1x RS-232 I/O series interface
IR Infrared Frequency
38Khz
Extend Distance
Up to 328 feet (100M), test via (UTP / CAT6 100M cable)
Wall Mount
Supports wall mount pack ( p/n:WM-1INCH-L80MM)
Rack Mount
Total 13 pcs installed into 19 inch 2U rack mount
Dimensions (LxWxH)
3.14 x 2.56 x 1.14 in (80x65x29mm)
Product Weight: Receiver
0.385 kgs / 0.847 lb / Transmitter: 0.185 kgs / 0.407 lb
Power Supply
Power Input +12VDC, 1A (Universal Type 50/60Hz, 100~240 VAC)
Power Consumption
Max. 650mA (Full load 1080p-60Hz signal with DC12V input)
Safety Approvals
CE, FCC, VCCI, RoHS & REACH
author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

author
James Johnson- Lockheed Martin

Knowledgeable, experienced and courteous staff. We needed Fiber Optic Extenders with EMI shielding to avoid interference in signal transfers. KVMSwitchTech worked with us to design a DVI Fiber Optic Extender customized for our application. Thanks for all your help.

Add a review

1 2 3 4 5

Related Products


Call to get best offer