Shinybow SB-6351R HDMI HDBaseT™ Wall Plate Receiver w/ PoH up to 330 Feet (100M) – (Single LAN, 2-way IR, RS-232, HDMI)

( 125 Reviews )

$399.00 $310.40

Description :

The SB-6351R HDBaseT™ Receiver can receive the HDMI, Ethernet, PoH power (48VDC) from the transmitter or IR remote input to a transmitter or output to a source and the RS-232 interface signal I/O to a HDBaseT™ transmitter (SB-6335T5 PoH) via a single LAN (category) cable for long distances up to 328 feet (100M) maximum. The SB-6351R Receiver uses a UTP/FTP CAT5e/6/6a/7 (category cable) via a RJ-45 8P8C female socket (supports 568a/b). This product provides higher full HD HDMI 1.4a, resolutions supporting 480i/p, 720p,1080i/p or High 4K2K quality that are identical to the high quality full HDMI 1.4 source signals. This receiver is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, Ethernet, RS-232 in, RS-232 out and PoH. Controls signals via a single category cable transmited from a HDBaseT™ transmitter.

Add to Cart

Product Features

HDBaseT™ TX/RX with 3D, 4K2K over a single UTP/STP cable up to 330ft (100M)
Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
Supports link speeds for TMDS Video formats up to a max 10.2Gbit/s, Signal 340MHz Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
Supports 1080p TV’s at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
Supports PoH power DC48V over HDBaseT™ (Power supports 48VDC from SB-6335T5 Transmitter)
Transfers Bi-directional Infrared control signal together with the HDMI signal
RS-232 port for firmware updates or RS-232 control signal transmission
Supports HDMI CEC between your connected source and display gear
LED indicators show the HDCP/LINK/POWER/POE status
HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over single category cable
Supports Super Audio CD (DSD), CEC commands protocol table

Specifications

Type of Extender	HDBaseT™ RX & TX use HDMI signal over category UTP/STP Cable
Input Signals	HDMI with Digital Video (TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp
HDBaseT™ Signal Supports	HDMI 1.4a HDMI format Standard, DVI and HDCP Compliant
Video Support	HDMI and DVI TMDS format for 1920x1200 resolution up to 10.2Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D
Category Cable Support	CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable
Support HDMI Resolutions	480p, 720p, 1080i/1080p and Ultra HD 4K2K
Scan Rate Accepted	Support HDMI full HD Resolution; Frequency 24Hz to 240Hz
Controls	1x IR in 1x IR out 1x RS-232 I/O 1x LAN series interface Rx High input Impedance: 1 M? differential
PoH Support	HDBaseT™ Receiver support 48VDC power from Transmitter (SB-6351T)
Transfer Distance	Up to 330ft (100M)
Low Distortion	Tx: 68dB SFDR@5Mhz 200? load Rx: 1Vpp@5MHz
HDMI I/O Connectors	HDMI Type A-SMD 19pin Female Type
HDBaseT™ I/O Connectors	HDBaseT™ RJ-45, 8p8c Female socket
Temperature	32°F-122°F Operation (0°C~50°C)
Safety Approvals	CE, FCC, VCCI, REACH
Size(LxWxH)	4.33 x 4.73 x 1.38 in (110x120x35 mm)
Shipping Weight (net)	0.36 kg/0.80 lb
Power Consumption	Max 1000mA (Full load 1080p-60Hz signal with use DC48V input)

View User Manual

Sam Smith - General Dynamics –

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

Melvin Parker - L3 Communications –

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.