has been added to your cart.

Shinybow SB-6353T/R KIT HDMI HDBaseT™ Wall Plate Transmitter w/PoH Receiver up to 330 Feet (100M) – (Single LAN, 2-Way IR, RS-232, HDMI)


$798.00 $633.60

Description :

 

The SB-6353T/R KIT contains both the SB-6353R HDMI, HDBaseT™ Receiver w/ PoH and the SB-6353T HDMI, HDBaseT™ Wall Plate Transmitter w/ PoH. 

The SB-6353R is a HDMI over HDBaseT™ with PoH (Power Over HDBaseT™) 48VDC output receiver. This HDBaseT™ receiver can receive the HDMI, IR remote in & out, RS-232 in & out, Ethernet signals and output PoH 48DC power over HDBaseT™ to a HDBaseT™ transmitter via a single category cable for long distances up to 928 feet (100M). The SB-6353R uses CAT6/6a/7 (UTP or FTP) category cable with RJ-45 8P8C connectors and supports the 568a or 568b color specification table. This HDBaseT™ receiver product provides higher full HD HDMI resolutions of 480i/p, 720p,1080i/p quality that is identical to the source to the HD destination display. The SB-6353R control signals are useful in receiving the HDMI digital video, digital multi-channel audio signals, IR in/out, RS-232 in/out, Ethernet series interface via a category cable from the HDBaseT™ Transmitter. 

The SB-6353T HDBaseT™ Transmitter can transmit HDMI, Ethernet, PoH power (48VDC) from the Receiver, IR Remote input to the Receiver or output to the destination and the RS-232 interface signal I/O to the HDBaseT™ Receiver (SB-6353R PoH) via single LAN (category) cable for long distances of up to 328 feet (100M) maximum. The SB-6353T Transmitter uses a single UTP/FTP (category cable) CAT5e, CAT6, CAT6a or CAT7 via a RJ-45 8P8C female socket (Supports 568a/b). This product provides higher full HD HDMI 1.4a with supported resolutions of 480i/p, 720p,1080i/p or High 4K2K quality that is identical to the high quality full HDMI 1.4 source signals. This Transmitter is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, Ethernet, RS-232 in/out and PoH signals via a single category cable transmitting to the HDBaseT™ Receiver.

 


Product Features

 

  • SB-6353R Receiver
    • HDBaseT™ RX with 3D, 4K2K over a single UTP/STP cable up to 330ft (100M)
    • Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
    • Supports link speeds for TMDS Video format max 10.2Gbit/s, 340MHz signal Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
    • Supports 1080p TV’s at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
    • Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
    • Supports PoH power DC48V over HDBaseT™ (Power supports 48VDC to the transmitter)
    • Transfers Bi-directional infrared control signals together with the HDMI signal
    • RS-232 port for firmware updates or RS-232 to control signal transmission
    • Supports HDMI CEC between your connected source and display gear
    • LED indicators to show the HDCP/LINK/POWER/POE status
    • HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over a single category cable
    • Supports Super Audio CD (DSD), CEC commands protocol table
    • Mounting ears and wall mount pack supplied
    • Power supply using universal power switch 48VDC, 50/60Hz, 100~240VAC
    SB-6353T Transmitter
    • HDBaseT™ TX 3D, 4K2K over a single UTP/STP cable up to 330ft (100M)
    • Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
    • Supports link speeds for TMDS video format for a max 10.2Gbit/s, Signal 340MHz Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
    • Supports 1080p TV’s at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
    • Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
    • Supports PoH power over HDBaseT™ (Power support 48VDC from HDBaseT™ Receiver SB-6353R)
    • Transfers Bi-directional Infrared control signals together with the HDMI signal
    • RS-232 port for firmware updates or RS-232 control signal transmission
    • Supports HDMI CEC between your connected source and display gear with LED indicators to show the POWER/HDMI/HDCP/LINK status
    • HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over a single category cable
    • Supports Super Audio CD (DSD), CEC commands protocol table

Specifications

Type of Extender
HDBaseT™ RX & TX HDMI signal over category UTP/STP Cable
Input Signals
HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vpp, DDC 5Vpp
HDBaseT™ Support
HDMI 1.4a HDMI format standard, DVI and HDCP Compliant
Video Supported
HDMI and DVI TMDS format for 1920x1200 resolutions up to 10.2Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D
Category Cable Support
CAT6, CAT6a, CAT7 UTP/FTP cable
Supported HDMI Resolutions
480p, 720p 1080i/1080p and Ultra HD 4K2K
Scan Rate Accepted
Supports HDMI full HD resolutions; Frequency 24Hz to 240Hz
Control
(1) IR in, (1) IR out, (1) RS-232 I/O and (1) LAN series interface
PoH Supported
HDBaseT™ Receiver supports 48VDC power to the transmitter (SB-6353T)
Transfer Distance
Up to 330ft (100M)
HDMI I/O Connectors
HDMI Type A - SMD 19pin female type
HDBaseT™ I/O Connectors
HDBaseT™ RJ-45, 8p8c female socket
Safety Approvals
CE, FCC, VCCI, REACH
Dimensions (LxWxH)
Receiver: 5.31 x 5.11 x 1 in (135x130x26mm) / Transmitter: 4.33 x 4.73 x 1.38 in (110x120x35mm)
Rack Mount
Use total of 10 pcs installs into one 19 inch rack mount
Weight
Receiver: 1.1 lb (Unit only) / 2.9 lb (Net) / Transmitter: 0.9 lb (Unit only) / 1.3 lb (Net)
Power Consumption
  • Receiver: Max 1750mA (Full load 1080p-60Hz signal with use DC48V input)
  • Transmitter: Max 1000mA (Full load 1080p-60Hz signal with use DC48V input)
Power Supply
Receiver: Power Input +48VDC, 1A (Universal Type 50/60Hz, 100~240VAC)

 

author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

author
James Johnson- Lockheed Martin

Knowledgeable, experienced and courteous staff. We needed Fiber Optic Extenders with EMI shielding to avoid interference in signal transfers. KVMSwitchTech worked with us to design a DVI Fiber Optic Extender customized for our application. Thanks for all your help.

author
Angela Russo - Panasonic

Rack LCDs for one of our newer locations were required for data monitoring. The light weight and short depth design of the Rackmount LCD Console was exactly what we were looking for. In addition, the product's streamlined and durable construction ensures its longevity and reliability in our environment. These guys are pros and know what they are doing.

author
James Kondrat - SHI International

Needed reseller pricing for Secure KVM Switches for one of our Government customers. They offered great pricing which helped us close the deal.

Add a review

1 2 3 4 5

Related Products


Call to get best offer