has been added to your cart.

HDMI Multiviewer Quad Screen with real time viewing and seamless switching


$1200.00 $699.00

Description :

 

KVMSwitchTech's HDMI-PIP-4P-MINI HDMI Quad Screen Multiviewer allows you to simultaneously display real time HDMI/DVI video from four HDMI sources on a single monitor, LCD or TV. It is capable of displaying the video sources in quad, PiP or full screen mode. This HDMI Multiviewer audio/ video output can be extended up to 250 ft away over a single CAT6/6a/7 cable.

HDMI Multiviewer Quad Screen with real time viewing and seamless switching

 


Product Features

 

  • HDMI 1.3a and HDCP1.2 compliant
  • Supports multiplexed HDMI (4) inputs and (1) output
  • Supports up to 1080p High Definition resolution
  • Supports 4x1 HDMI Quad Multi-viewer mode and seamless switch
  • Supports scaler up, scaler down function
  • Supports multi output resolution
  • Supports digital audio format LPCM/AC3/DTS
  • Supports push button, IR, and RS232 control
  • IR system allows for control of source at display end
  • Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6/7 cable
  • Quad, Picture in Picture, and Full Screen display modes
  • Quad Mode:
    • In quad mode, the screen is split into (4) fields of equal size each displaying the entire contents of (4) different video sources
    • Fluid, real-time video performance with 60 frames per second (fps) in all (4) quadrants
  • Full Screen Mode:
    • In full screen mode, (1) of the (4) video sources is displayed in full screen size and maximum resolution
  • Picture in Picture (PIP) Mode:
    • In PIP mode, the full screen display of (1) of the (4) video sources is accompanied by (3) small images (thumbnails) of the (3) other video sources on the right hand margin of the screen allowing simultaneous monitoring. Independent video in to video out resolution
  • Supports HDTV resolutions up to 1080p and computer resolutions to 1920x1200
  • HDMI features supported:
    • Inputs: 24, 30, and 36bit xvYCC, sRGB, and YCbCr
    • Outputs: 24 and 30bit sRGB
    • (4) channel non-mixing or (1) channel mixing stereo with 16, 20, or 24bit uncompressed PCM audio
    • Bandwidth up to 165MHz
      • Inputs: 2.25 Gbps
      • Output: 2.0625 Gbps
  • Fluid, real-time video performance with (60) frames per second (fps) in all (4) quadrants
  • Switch audio independently of video from connected HDMI sources in Quad mode
  • Control the multiviewer through front panel buttons, IR remote, or Graphical User Interface (GUI) via RS-232
    • Bi-directional IR control from multiviewer and remote unit locations
  • Cascade multiviewers to display video from any number of video sources on (1) screen
    • Each unit in the cascade must be configured and controlled individually
    • Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length between all levels of the cascade does not exceed 250 feet
  • Adjust output video brightness, contrast, color, and sharpness
  • Supports simultaneous local and remote HDMI output
    • Features coax SPDIF audio outputs at the multiviewer and receiver
  • Built-in default EDID table
    • Supported output resolutions can be selected
  • ARC (Audio Return Channel) support at the receiver unit via coax SPDIF output for speakers
    • Turn ARC on to play audio from an HDTV with ARC support to the connected speakers
    • Turn ARC off to play audio from the multiviewer source to the connected speakers


Specifications

Video Bandwidth
2.25Gbps
Input Ports
  • 4x HDMI (Female type)
  • 1x 3.5mm port for IR receiver
  • 1x RS232
Output Ports
  • 1x HDMI (Female type)
  • 1x RCA
  • 1x RJ45 connector for CATx cable to remote unit
  • 1x UTP
  • 1x coax connector for local SPDIF audio
  • 4x 3.5mm ports for IR emitters
Audio Output
PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1
Input Resolution
480i60Hz,480p60Hz, 576i50Hz, 576p50Hz, 720p50/60Hz, 1080i50/60Hz, 1080p24/30/50/60Hz, 800x600@60, 1024x768@60, 1280x720@60, 1920x1080@60
Output Resolution
1080p, 1080i, 720p, 1024x768, 1360x768
Control
  • Infrared Remote Control
  • Front Panel Interface
  • RS-232 Control
ESD Protection: Human Body model
  • ±8 kV (air-gap discharge)
  • ±4 kV (contact discharge)
Power Supply
12 V/2.5A DC (US/EU standards, CE/FCC/UL certified)
Dimensions (WxDxH)
4.6 x 9.8 x 1.3 in (118x250x32 mm)
Weight
750g
Chassis Material
Metal
Silkscreen Color
Black
Operating Temperature
0°C~40°C/ 32°F~104°F
Storage Temperature
-20°C~60°C/-4°F~140°F
Relative Humidity
20~90% RH (non-condensing)
Power Consumption
10W

 

Cable
Distance
Max Resolution
CAT6 Standard UTP
90 ft
1080p/60Hz
CAT6 Solid UTP*
125 ft
1080p/60Hz
 
250 ft
1080i/60Hz or 720p/60Hz
CAT6a/7 Solid UTP/STP*
250 ft
1080p/60Hz

 

author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

author
James Johnson- Lockheed Martin

Knowledgeable, experienced and courteous staff. We needed Fiber Optic Extenders with EMI shielding to avoid interference in signal transfers. KVMSwitchTech worked with us to design a DVI Fiber Optic Extender customized for our application. Thanks for all your help.

Add a review

1 2 3 4 5

Related Products


Call to get best offer