has been added to your cart.

SmartAVI SDX-S HDBaseT DVI Extender with RS232 and Infra Red control up to 330ft over a single Cat5e/Cat6 Cable


$999.00 $699.00

Description :

SDX-S SmartAVI DVI Extender uses HDBaseT technology. The SDX-S HDBaseT DVI extender is capable of sending a DVI-D Signal up to 330 feet over a single conventional and inexpensive CAT5e/6 cable. HDBaseT technology is superior to older DVI extenders that require special CAT6 sheilded cable to go a short distance. The SDX-S also has RS232 and IR extension, giving you the ability to control your displays or devices remotely.

 


Product Features

 

  • Extends DVI-D up to 330 feet (100m) from the source
  • Data recovery for digital Video
  • Supports up to 1920x1200 digital Video resolution
  • Automatic DDC Learning
  • Uncompressed Video HDBaseT
  • IR and RS232 extension allows for remote control of displays
  • External power adapter for transmitter and receiver unit
  • Plug and play


Specifications

 

VIDEO
Format DVI-D Single Link
Maximum Pixel Clock 165 MHz
Input Interface (TX) (1) DVI-D 29-pin female
Output Interface (RX) (1) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
RS232
Input Interface (TX) DB9 (Female)
Output Interface (RX) DB9 (Female)
Speed @ 115 Kbps
IR
Frequency Response 30KHz to 80KHz
Input Interface (TX) (1) 3.5 mm (Female)
Output Interface (RX) (1) 3.5 mm (Female)
OTHER
Power External 100-240 VAC/5VDC4A @20W
Dimensions 5.125 in W x 1 in H x 3.625 in D
Weight 0.5 lb/Each
author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

Add a review

1 2 3 4 5

Related Products


Call to get best offer