has been added to your cart.

Shinybow SB-5688CAP 8x HDMI Inputs / 8x HDMI & 8x HDBaseT™ PoH Outputs - UHD 4K2K Matrix Switch w/ EDID Management/Learning w/ Auxiliary Audio I/O


$7900.00 $4327.10


Description :

The Shinybow SB-5688CAP is a professional 8x8 matrix routing switch with PoH (Power Over HDBaseT™). Supporting (8) HDMI and (8) Auxiliary Audio Inputs and (8) HDMI, (8) SPDIF and (8) HDBaseT™ (PoH) Outputs. The SB-5688CAP is based on the HDBaseT™ standards and supports full HDMI video resolution with embedded EDID and PoH function, Audio, RS-232, Ethernet and bi-directional IR, all over a single category cable. With a signal bandwidth of 340Mhz, so there is no signal degradation. High Definition Digital signals can be selected and distributed to any (8) inputs to the (16) outputs simultaneously (channel outputs mirrored). The switcher is certified as being fully CEC, ARC and HDCP 2.0 compliant, full HD 4K2K HDMI V1.4a 3D formats,with data rates up to 6.75 Gbps. Using the build-in booster, each HDMI output port is capable of driving cable lengths for 1080p up to 98 ft (30M) & 4K2K up to 66 ft (20M). Supports UXGA/WUXGA/DVI 1920x1200 resolutions to any HD display. The SB-5688CAP has 1x HDMI and Auxiliary Audio (analog stereo audio) connector per input, effectively making this an (8) in x (16) out switcher (same signal on both outputs). Using the IR remote, the switcher’s HDBaseT™ Extender Transmitter (Tx) allows you to connect a source in a remote location. Likewise, the HDBaseT™ output and our HDBaseT™ Receiver allows you to connect a display in a remote location. The EDID management can be selected between (7) different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). An RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

 


Product Features

 

  • (8) HDMI with Auxiliary Audio (Analog Audio) player devices matrix switched to (8) HDMI with S/PDIF outputs and (8) HDBaseT™ Transmitter with PoH output to (8) destinations
  • Application HDBaseT™ specification with PoH 48VDC, IR, RS-232, Multi Audio Format and HD
  • Video Signals over one CATx (6/6a/7) category cable
  • HDMI digital video w/ embedded HDCP, DVI format and CEC/HDCP 2.0 compliant
  • Worldwide control EDID modes for HDMI full 4K2K (24/30 Hz) HD video resolutions
  • Link speeds of up to 6.75Gbps (link clock rate of 340MbHz), Supports HDMI 4K2K, 1.4a 3D formats
  • Wide range of HD resolutions from PC XGA to WUXGA 1920x1200 and HDTV/DTV HDMI resolutions 480i/480p, 576i/576p, 720p, 1080i/p & 4K2K (24/30Hz)
  • Compatible with all HDMI source devices, PC monitors, Plasma HD displays, HDTV and audio receivers or audio amplifiers
  • Digital video TMDS formats resolutions up to 4K2K with Deep color 36-bit
  • Digital Audio Support:Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2
  • Audio Input: Supports Auxiliary Audio (analog stereo audio)
  • Audio Output: Support Digital Audio ARC or Digital Audio S/PDIF (from HDMI source or Auxiliary Audio)
  • Various User Interface controls:
    • Windows based GUI control via RS-232 port
    • Front panel push button
    • IR wireless remote controller
    • Ethernet Switch control
    • Third party RS-232 controller (via simple ASCII)
  • Support world wide (9) control function keys:
    • Full function front panel controls: ARC/AUX/ALL/OFF/EDID/LOCK/RECALL/MEMORY/ENTER
  • Support EDID modes:
    • a. (7) Embedded EDID modes: FSS/H24-3D/H24-3D-M/H36-3D/H36-3D-M/4K2K-3D/DVI-D 1920x1200-60Hz
    • b. External modes: Learning mode-1 (Single Learning) & Learning mode-2 (Multiple Learning)
  • Automatic scanning input & output status via LCM show on front panel
  • Using the build-in booster, each HDMI output port is capable of driving cable lengths for 1080p up to 98 ft (30M) & 4K2K up to 66 ft (20M)
  • Supports IR Remote and IR Extender with distance up to ~984 ft (300M) Maximum
  • Supports Universal power adaptor AC90V~AC240V, 50/60Hz


Specifications

Type of HDMI Switcher
(8)x inputs to (8)x iutputs HDMI over HDBaseT™ Matrix Switch with Audio and Extension
HDMI Support
HDMI 4K2K, 1080p-@60Hz, H36-bit Deep color, 3D of HDMI V1.4 formats
HDBaseT Support
Bi-directional IR, RS-232, Multi format Audio, Ethernet and PoH function, over one CATx cable
HDCP/CEC Support
HDCP 2.0 Compliant, CEC Compliant
Video Bandwidth
Double Data Rates: 340Mhz, Total 6.75Gbps bandwidth
Digital Video Support
HD: 480i/480p/720p/1080i/p and 4K2K up to 36bit deep color
Inputs
  • Video Inputs (HDMI): 8x HDMI (HDMI or DVI digital source)
  • Audio Input: 8x Audio (Analog Stereo, AUX port. 3.5mm Jack)
Outputs
  • Video Outputs (HDMI):
    • HDMI: 8x HDMI (to Destination)
    • HDBaseT: 8x HDBaseT™ Transmitter (with PoH 48VDC via category cable & RJ-45 connector)
  • Audio Output:
    • 8x S/PDIF: Multi Audio Formats 5.1 from HDMI or LPCM-2CH from Auxiliary audio
    • 8x ARC: TV Return Channel Audio
    • 8x HDMI: Multi Audio Formats 5.1/7.1, MAT (MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6CH, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)
HDBaseT™ Control In
  • 8x IR in (Send IR signals To 8x Rooms via HDBaseT™ Transmitter)
  • 1x ALL IR in (Send IR Signals To 8x Rooms - via HDBaseT™ Transmitter)
HDBaseT™ Control Out
  • 8x IR out (Link to Receive IR signals from 8x Rooms via HDBaseT™ Extender)
  • 1x ALL IR out (Link to Receive IR signals from 8x Rooms via HDBaseT™ Extender)
  • 1x LAN (All Switcher HDBaseT™ Transmitter Ethernets link to HDBaseT™ Receiver)
HDBaseT Control I/O
  • 8x RS-232 I/O (Control 8x Rooms RS-232 via Switcher HDBaseT™ Extender Tx)
Switch Controls
  • 1x Select & Function buttons on front panel (Data status via LCM panel show out)
  • 1x IR Remote Controller (switch control)
  • 8x IR Room Remote Controller (switch control)
  • 1x IR External port (switch control via 3.5mm OD Jack)
  • 1x RS-232 series interface (switch control)
  • 1x Ethernet series interface (switch control)
Source Status
Input status LEDs indicates presence of a live signal
(25) Function Control Keys
  • 1. ARC
  • 2. AUX
  • 3. ALL
  • 4. OFF
  • 5. RECALL
  • 6. ENTER
  • 7. MEMORY
  • 8. LOCK
  • 9. EDID
  • 10. Destination button (1) thru (8)
  • 11. Source button (1) thru (8)
(7) EDID management
  • Select Embedded EDID modes:
    • Mode1: FSS
    • Mode2: H24-3D
    • Mode3: H24-3D-M
    • Mode4: H36-3D
    • Mode5: H36-3D-M
    • Mode6: 4K2K-3D, PCM-2CH
    • Mode7: DVI-D 1920x1200-60Hz
  • Select LEARNING mode:
    • Learning Destination EDID to Link Source. Learning mode-1 (Single Learning), Learning mode-2 (Multiple Learning)
Infrared Frequency
38Khz
IR External Distance
~984 ft/300M maximum
HDBaseT™ Extender Distance
~328 ft/100M maximum
HDMI I/O Connector
HDMI Type A-SMD 19pin Female Type
Temperature
32°F-100°F Operation (0°C-38°C)
Dimensions (LxWxH)
19 x 9.85 x 3.46 in (482x250x88 mm)
Rack Mount
2RU High 19 in Rack Mount #2U-440L (with rack mount)
Power Supply
AC 100~240VAC 50/60Hz (Power Consumption: 10A Maximum)
Safety Approvals
CE, FCC, RoHS, REACH
Product Weight
3.85 Kg/8.47 lb
Shipping Weight
10.4 Kg/23 lb

 

author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

author
James Johnson- Lockheed Martin

Knowledgeable, experienced and courteous staff. We needed Fiber Optic Extenders with EMI shielding to avoid interference in signal transfers. KVMSwitchTech worked with us to design a DVI Fiber Optic Extender customized for our application. Thanks for all your help.

Add a review

1 2 3 4 5

Related Products


Call to get best offer