has been added to your cart.

Shinybow SB-5688CK 8x HDMI Inputs / 8x HDMI & 8x HDBaseT™ Outputs - UHD 4K2K Matrix Routing Switch w/ EDID Management/Learning


$5400.00 $3561.28


Description :

The Shinybow SB-5688CK is a professional 8x8 matrix routing switch. Supporting (8) HDMI Inputs and (8) HDMI and (8) HDBaseT™ Outputs. The SB-5688CK is based on HDBaseT™ standards and supports full HDMI video resolutions with embedded EDID, Audio, RS-232, Ethernet and bi-directional IR, all over a single CATx cable. This unit has a wide frequency range of 25MHz ~ 340 MHz so there is no signal degradation. High Definition Digital signals can be selected and distributed to any of the (8) Inputs to any of the (16) outputs simultaneously (channel outputs mirrored). The switcher is certified as being fully CEC and HDCP 1.3 and supports HDMI 1.4a, 4K2K@30Hz, DVI 1.0, 3D formats. Supports UXGA/WUXGA/DVI 1920x1200 resolutions to any HD display. The SB-5688CK has 1x HDMI port per Input and 8x HDMI and 8x HDBaseT™ ports per Ouput, effectively making this an (8) in by (16) out switcher (same signal on both HDMI and HDBaseT™ outputs). Using the IR remote and the switcher’s HDBaseT™ extender transmitter (Tx) allows you to connect a source in a remote location. Likewise, the HDBaseT™ Output and our HDBaseT™ receivers allow you to connect a displays in remote locations. The EDID management can be selected between (7) different modes. Control is provided via front panel push buttons, IR remote, RS-232 or TCP/IP (not a web-browser). A RS-232 Windows GUI interface is provided for matrix routing control (Windows only).

 


Product Features

 

  • (8) HDMI digital video and digital multi-channel audio player source devices matrix switched to (8) HDMI and (8) HDBaseT™ Transmitter outputs to (8) destinations
  • New IR Matrix Source Routing Control
  • HDBaseT™, IR, RS-232, Multi-channel digital audio format applications and HD video signals over single CATx (6/6a/7) category cable
  • HDMI digital video w/ embedded HDCP, DVI 1.0 formats and CEC/HDCP 1.3 compliant
  • Worldwide EDID control modes for full HDMI 4K2K@24/30Hz HD video resolutions
  • Supports HDMI 4K2K@24/30Hz, 1.4a 3D formats
  • Wide range of HD resolutions from PC, XGA to WUXGA 1920x1200 and HDTV/DTV, HDMI resolutions for 480i/480p, 576i/576p, 720p, 1080i/p & 4K2K (24/30Hz)
  • Compatible with all HDMI source devices, PC monitors, Plasma HD displays, HDTVs and audio receivers or audio amplifiers
  • Digital video TMDS formats resolutions up to 4K2K with Deep color 36-bit
  • Digital multi-channel Audio Support : Dolby TrueHD, Dolby Digital, Dolby Digital Plug/ex, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, LPCM2
  • Audio Input: Supports HDMI multi-channel digital audio
  • Audio Output: Supports HDMI multi-channel digital audio
  • Various User Interface Controls:
    • Windows based GUI control via RS-232 Interface control driver for 2000/XP/WIN7-32/WIN7-64/WIN8
    • Front panel push button
    • IR wireless remote controller
    • Ethernet switch control
    • Third party RS-232 controller (via simple ASCII)
  • Supports (7) Worldwide Control Function Keys: Full function front panel controls: ALL, OFF, EDID, LOCK, RECALL, MEMORY & ENTER
  • Supports EDID Modes:
    • a. Embedded EDID Modes: FSS, H24-3D, H24-3D-M, H36-3D, H36-3D-M, 4K2K-3D & DVI-D 1920x1200-60Hz
    • b. External Modes: Learning mode
  • Automatic scanning input & output status via LCM screen on the front panel
  • Supports IR remotes and IR extenders for a distance of up to ~ 984 feet (300M) maximum
  • Supports universal power adaptor AC100V~AC240V, 50/60Hz


Specifications

Type of HDMI Switcher:
(8) Inputs to (8) Outputs HDMI over HDBaseT™ Matrix Switch with single CATx
HDMI Support
HDMI 4K2K@30Hz, 1080p@60Hz, H36-bit Deep color, 3D of HDMI V1.4 formats
HDBaseT™ Support
Bi-directional IR, RS-232, Multi Format Audio, Ethernet over one CATx cable
HDCP/CEC Support
HDCP 1.3 Compliant, CEC Compliant
Video Bandwidth
Double Data Rates: 340 MHz, Total 6.75Gbps bandwidth
Digital Video Support
HD: 480i/480p/720p/1080i/p and 4K2K up to 36bit deep color
Inputs
8x HDMI (HDMI or DVI digital source)
Outputs
  • HDMI: 8x HDMI (to Destination)
  • HDBaseT™: 8x HDBaseT™ Transmitter via category cable & RJ-45 connector
HDBaseT™ Control Inputs
8x IR in (Sends IR signals to (8) Rooms via HDBaseT™ Transmitter)
HDBaseT™ Control Outputs
  • 8x IR out (Link to Receive IR signals from (8) Rooms via a HDBaseT™ Extender)
  • 1x All Tx LAN (All HDBaseT™ Transmitter Ethernet links to a HDBaseT™ Receiver)
HDBaseT™ Control I/O
  • 8x RS-232 I/O (Control (8) Rooms RS-232 via HDBaseT™ extender Tx)
  • 8x IR In to 8x IR Out following the IR Matrix Switcher status
Switcher Controls
  • 1x Select & Function buttons on front panel (Data status via LCM panel show out)
  • 1x IR Remote Controller (switch control)
  • 8x IR Room Remote Controller (switch control)
  • 1x IR External port (switch control via 3.5mm OD Jack)
  • 1x RS-232 series interface (switch control)
  • 1x Ethernet series interface (switch control)
Source Status
Input status LEDs indicates presence of a live signal
(23) Function Control Keys
1. ALL, 2. OFF, 3. RECALL, 4. ENTER, 5. MEMORY, 6. LOCK, 7. EDID, 8. Destination button 1 thru 8, 9. Source button 1 thru 8
(7) EDID Management
  • Select Embedded EDID Modes: Mode1: FSS, Mode2: H24-3D, Mode3: H24-3D-M, Mode4: H36-3D, Mode5: H36-3D-M, Mode6: 4K2K-3D, PCM-2CH, Mode7: DVI-D 1920x1200
  • Select LEARNING Mode: Learning Destination EDID to Link Source
Infrared Frequency
38 Khz
IR Extend Distance
~984 feet/300M max
HDBaseT™ Extender Distance
~328 feet/100M max
HDMI I/O Connector
HDMI Type A - SMD 19-pin female type
Temperature
Operating Temperature 32°F-100°F (0°C-32°C)
Dimensions (LxWxH)
19 x 9.85 x 3.46 in (482x250x88 mm)
Rack Mount
2RU High 19in Rack Mount #2U-440L (with rack mount)
Power Supply
AC 100~240 VAC 50/60Hz. (120V/1A/120W; 220V/0.54A/120W)
Safety Approvals
CE, FCC, REACH and WEEE
Product Weight
3.75 Kg/6.25 lb
author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

author
Melvin Parker - L3 Communications

KVMSwitchTech helped us with a 1080p Rackmount Console with integrated 8 Port USB KVM Switch for our CNC Machines. The product works great and the staff is very friendly. I would recommend this Company.

author
James Johnson- Lockheed Martin

Knowledgeable, experienced and courteous staff. We needed Fiber Optic Extenders with EMI shielding to avoid interference in signal transfers. KVMSwitchTech worked with us to design a DVI Fiber Optic Extender customized for our application. Thanks for all your help.

author
Angela Russo - Panasonic

Rack LCDs for one of our newer locations were required for data monitoring. The light weight and short depth design of the Rackmount LCD Console was exactly what we were looking for. In addition, the product's streamlined and durable construction ensures its longevity and reliability in our environment. These guys are pros and know what they are doing.

Add a review

1 2 3 4 5

Related Products


Call to get best offer