has been added to your cart.

HDMI Receiver for HDMI Matrix Switch over CAT5

$300.00 $195.00

The HDMI-C5SW-R, HDMI 1.3 Matrix Switch Receiver over CAT5 with IR Pass-through provides the most flexible and cost effective solution in the market to route high definition Video sources plus multi-channel (up to 7.1 channel) digital audio from any of the four HDMI sources to the remote displays at the same time. HDMI-C5SW-R can be used with SW-HDMI-C5-8X8 or SW-HDMI-C5-4X4 Matrix Switch Series over CAT5/CAT6. Through low cost Cat-5/5e/6 LAN cables, not only high quality Video and Audio can be transmitted to the display sites, but also users can switch among four HDMI sources using the push-in button or remote control. With single power design at the source site, each remote module is easily installed without power supply. Furthermore, the built-in IR extension function makes users at display site access the DVD player, PS3 or any HDMI supported devices directly.

Product Features


  • Silicon Image chipset embedded for best quality, compatibility and reliability
  • HDMI 1.3 compliant
  • HDCP Compliant
  • Allows any source to be displayed on multiple displays at the same time
  • Allows any HDMI display to view any HDMI source at any time
  • Supports 7.1 Channel digital audio
  • Supports default HDMI EDID and learns the EDID of displays
  • The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remotecontrol, or RS-232 control
  • Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from remote receiver to matrix master
  • Allows to control matrix master through IR remote control at remote receiver’s site
  • Extends Video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better HDMI source device, better grade HDMI display, and better quality solid CAT6 cable
  • Easy installation with Rack-mounting and wall-mounting designs for master and receiver respectively
  • Fast response time – 2~5 seconds for channel


HDMI 1.3 Matrix Switch Receiver over CAT5
HDMI Compliance
HDMI 1.3
HDCP Compliance
Video Bandwidth
Single Link 225 Mhz (6.75Gbps)
Video Resolutions
480i / 480p / 720p / 1080i / 1080p60
HDMI Transmission Range
Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 55meter (180feet) (CAT6)
Audio Support
Surround Sound (up to 7.1 ch) or Stereo Digital Audio
8-level Digital Control at Receiver Unit
Input TMDS Signal
1.2 Volts (peak-to-peak)
Input DDC Signal
5 Volts (peak-to-peak, TTL)
ESD Protection
[1] Human body model ? ±15kV [air-gap discharge] & ±8kV [contact discharge]
[2] Core chipset ? ±8kV
Input Connectors
1 x RJ45 HDMI Signal
1 x RJ45 IR Signal
Output Connectors
1 x HDMI
HDMI Input Selection
Push Button / IR Remote
HDMI Source Control
Through IR Control Path from IR Receiver
3.3" x 3.5" x 1"
Power Supply
Mostly not required
Power Consumption
1 Watt (max) / Provided by IR Signal CAT5/CAT6 cable from SW-HDMI-C5-8X8 / SW-HDMI-C5-4X4
Operating Temperature
0~40°C (32~104°F)
Storage Temperature
-20~60°C (-4~140°F)
Relative Humidity
20 ~ 90% RH (non condensation)


Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

Add a review

1 2 3 4 5

Related Products

Call to get best offer