has been added to your cart.

Shinybow SB-6353T HDMI HDBaseT Wall Plate Transmitter w/ PoH up to 330 Feet (100M) – (Single LAN, 2-Way IR, RS-232, HDMI)


$369.00 $300.00

Description :

The SB-6353T HDBaseT™ Transmitter can transmit HDMI, Ethernet, PoH power (48VDC) from the Receiver, IR Remote input to the Receiver or output to the destination and the RS-232 interface signal I/O to the HDBaseT™ Receiver (SB-6353R PoH) via single LAN (category) cable for long distances of up to 328 feet (100M) maximum. The SB-6353T Transmitter uses a single UTP/FTP (category cable) CAT5e, CAT6, CAT6a or CAT7 via a RJ-45 8P8C female socket (Supports 568a/b). This product provides higher full HD HDMI 1.4a with supported resolutions of 480i/p, 720p,1080i/p or High 4K2K quality that is identical to the high quality full HDMI 1.4 source signals. This Transmitter is useful for sending the HDMI digital video / multi-channel audio format, IR remote in or out, Ethernet, RS-232 in/out and PoH signals via a single category cable transmitting to the HDBaseT™ Receiver.

 


Product Features

 

  • HDBaseT™ TX 3D, 4K2K over a single UTP/STP cable up to 330ft (100M)
  • Supports HDMI 1080p@60 video V1.4a 3D and Ultra HD 4K2K video, CEC / HDCP compliant
  • Supports link speeds for TMDS video format for a max 10.2Gbit/s, Signal 340MHz Deep Color, Full HD 1080p@60Hz@24/36/48bit/pixels
  • Supports 1080p TV’s at 24/30/60/100/200/240Hz and above as well as Blu-rays at 24FPS
  • Supports Digital Audio 7.1 LPCM 192KHz, 24bits, Full HD Dolby TrueHD and DTS-HD Master Audio uncompressed HD audio formats
  • Supports PoH power over HDBaseT™ (Power support 48VDC from HDBaseT™ Receiver SB-6353R)
  • Transfers Bi-directional Infrared control signals together with the HDMI signal
  • RS-232 port for firmware updates or RS-232 control signal transmission
  • Supports HDMI CEC between your connected source and display gear with LED indicators to show the POWER/HDMI/HDCP/LINK status
  • HDBaseT™ transfers HDMI, PoE, LAN, RS-232 and Bi-Directional IR over a single category cable
  • Supports Super Audio CD (DSD), CEC commands protocol table


Specifications

Type of Extender
HDBaseT™ HDMI signal over category UTP/STP Cable
Input Signals
HDMI with Digital Video (TMDS)/Audio 0.5~1.0Vpp, DDC 5Vpp
HDBaseT™ Signal Supports
HDMI 1.4a HDMI format Standard, DVI and HDCP Compliant
Video Supported
HDMI and DVI TMDS formats for 1920x1200 resolution up to 10.2Gbps (340MHz), Digital RGB 48bits/px, deep color, 3D
Category Cable Supported
CAT5e, CAT6, CAT6a, CAT7 UTP/STP cable
Supports HDMI Resolutions
480p, 720p 1080i/1080p and Ultra HD 4K2K
Scan Rate Accepted
Supports HDMI full HD resolution; Frequency 24Hz to 240Hz
Controls
IR in / IR out / RS-232 I/O / LAN series interface
PoH Supported
Supports PoH power 48VDC from HDBaseT™ Receiver SB-6353R
Transfer Distance
Up to 330ft (100M)
HDMI I/O Connectors
HDMI Type A - SMD 19pin female type
HDBaseT™ I/O Connectors
HDBaseT™ RJ-45, 8p8c female socket
Temperature
32°F - 96°F Operation (0°C ~ 36°C)
Safety Approvals
CE, FCC, VCCI, REACH
Dimensions (LxWxH)
4.33 x 4.73 x 1.38 in (110x120x35mm)
Weight
0.9 lb (Unit only) / 1.3 lb (Net)
Power Consumption
Max 1000mA (Full load 1080p-60Hz signal with use DC48V input)
author
Sam Smith - General Dynamics

We were looking for a 1U 19" Rackmount LCD Keyboard console for our Flight Simulation System. KVMSwitchTech promptly responded to all our questions. We purchased several NRKD-KVM-19 Rackmount Console units from them and are very happy with the performance. Keep up the good work.

Add a review

1 2 3 4 5

Related Products


Call to get best offer