Video Matrix Switch Buyer's Guide: How to Route Multiple Sources to Multiple Displays
A video matrix switch routes any of its inputs to any of its outputs independently and at the same time, so an 8x8 matrix lets 8 sources feed 8 displays in any combination simultaneously. Unlike a splitter (one source to many identical displays) or a basic switch (many sources to one display), a true matrix gives every output its own independent source selection. KVMSwitchTech stocks video matrix switches across every major signal format, HDMI, DVI, VGA, component, composite, and Cat5/HDBaseT, in configurations from 4x2 up to 64x64, with 4K/UHD support and RS-232, IR, front-panel, and TCP/IP control.
Subcategories
Shop by type
Browse products
16x8 4Kx2K HDMI Matrix Switcher with RS232, IR and TCP/IP Control
In stock
8x16 4Kx2K HDMI Matrix Switcher with RS232, IR and TCP/IP Control
In stock
8X8 HDMI/USB 2.0 matrix switch with 4K resolution and keyboard-mouse capabilities (no emulation)
In stock
12x12 HDMI Video Matrix Switch with RS232, IR and TCP/IP Control
In stock
16x8 HDMI Video Matrix Switch with RS232, IR and TCP/IP Control
In stock
8x16 HDMI Video Matrix Switch with RS232, IR and TCP/IP Control
In stock
16x4 DVI Video Matrix Switch with RS232, IR and TCP/IP Control
In stock
16x16 Modular Matrix Switch 4Kx2K with HDMI, DVI, VGA support and TCP/IP Control
In stock
16x8 DVI Video Matrix Switch with RS232, IR and TCP/IP Control
In stock
16x16 HDMI Video Matrix Switch with RS232, IR and TCP/IP Control
In stock
RS-232 / TCP/IP HDMI Router (HDMODMTX-1616-IP)
In stock
32x32 Modular Matrix Switch 4Kx2K with HDMI, DVI, VGA support and TCP/IP Control
In stock
16x16 4Kx2K HDMI Matrix Switcher with RS232, IR and TCP/IP Control
In stock
32x32 Multi Video Format Matrix Switch with HDMI, DVI, SDI, VGA, Fiber Optic support and TCP/IP Control
In stock
32x32 Multi Video Format Matrix Switch with HDMI, DVI, SDI, VGA, Fiber Optic support and TCP/IP Control
In stock
32x32 Multi Video Format Matrix Switch with HDMI, DVI, SDI, VGA, Fiber Optic support and TCP/IP Control
In stock
Step 1: Choose your signal format
The matrix must match the video signal your sources and displays use. Pick the format below, or a multi-format modular matrix if you need to mix HDMI, DVI, SDI, VGA, and fiber in one chassis.
- HDMI matrix switch – modern 4K/UHD sources, digital audio, HDCP-protected content.
- DVI matrix switch – medical, command-center, and enterprise displays up to 1920x1200.
- VGA matrix switch and VGA audio matrix – legacy analog RGB with optional stereo audio.
- Component and composite – HDTV YPbPr and standard-definition AV sources.
- Cat5 video matrix and Cat5e/6 HDBaseT HDMI matrix – extend switched video over structured cabling up to 330 ft (1,000 ft for Cat5 AV).
Step 2: Size the matrix (inputs x outputs)
Count your independent sources and your displays, then buy for growth. Matrices scale in fixed sizes, and moving up a tier later usually means replacing the unit unless you choose a modular chassis.
| Configuration | Best for | Typical use case |
|---|---|---|
| 4x2 / 4x4 | Conference rooms, bars, small signage | A few sources to a couple of screens |
| 8x8 | Control rooms, classrooms, worship | Mid-size AV distribution with independent routing |
| 16x16 | Command centers, broadcast, signage networks | Many sources, video-wall feeds, redundancy |
| 32x32 / 64x64 | Enterprise, data center, large venues | Facility-wide routing, often with TCP/IP and fiber |
Step 3: Confirm resolution, HDCP, and distance
For 4K, verify support for 4K@60Hz 4:4:4 and HDCP 2.2/2.3 if you route protected content. Native HDMI/DVI is reliable to ~15-25 ft; beyond that choose an HDBaseT matrix (single Cat5e/6/7 to ~330 ft) or pair with a fiber optic extender for runs up to 3,300 ft.
Step 4: Pick your control method
- Front panel / IR remote – simplest, for manual switching.
- RS-232 – integration with Crestron, AMX, or Control4 control systems.
- TCP/IP – browser or control-system operation over the network; best for unattended and multi-site deployments.
Matrix vs. Splitter vs. Switch
| Device | Sources | Displays | Independent routing? |
|---|---|---|---|
| Splitter | 1 | Many (same image) | No |
| Switch | Many | 1 | No |
| Matrix switch | Many | Many | Yes |
Frequently Asked Questions
What is a video matrix switch used for?
It routes multiple video sources to multiple displays independently and at the same time, common in control rooms, classrooms, digital signage, broadcast, and video walls where each screen may need a different source.
What is the difference between a matrix switch and a splitter?
A splitter sends one source to many displays showing the same image. A matrix lets any source reach any display independently.
Which signal format should I choose?
Match the matrix to your sources and displays: HDMI for modern 4K gear, DVI for enterprise/medical, VGA for legacy RGB, component/composite for HDTV and SD AV, and Cat5/HDBaseT when you need to extend switched video over structured cabling.
Can a video matrix switch do 4K?
Yes. Choose a model rated for 4K@60Hz 4:4:4 with HDCP 2.2/2.3 to pass protected 4K content without dropouts.
How far can a matrix send video?
Native HDMI/DVI outputs reach ~15-25 ft. HDBaseT models extend to ~330 ft over Cat cable; fiber optic extenders push distances to 1,000 m (3,300 ft).
Can one matrix handle multiple formats at once?
Yes. Modular multi-format matrix switches accept HDMI, DVI, SDI, VGA, and fiber input/output cards in a single chassis with TCP/IP control.
Not sure which matrix fits your deployment? Our engineers help match signal format, port count, resolution, control, and distance to your deployment. Call (216) 798-7530 for a free system design.
Filters